You are here

JEC Asia celebrates its 5th anniversary in 2012!

JEC Asia 2012
24 May 2012
JEC Asia will take place for the first time in June (June 26-28, 2012 in Singapore)

JEC Asia Composites Show and Conferences celebrates its 5th anniversary in Singapore from June 26 to June 28, 2012 at Suntec Singapore! On this occasion, the 2012 session will include new contents.

This year, Malaysia is the country of honor.

Biocomposites, Automotive and Automation are the three main themes

JEC Asia is not only a showcase, it is also the I.C.S. (Innovative Composites Summit): the only summit in the Asia-Pacific region that gathers the widest range of technical papers, composites experts and qualified industry delegates in a single event.

(please find the program of forums & conferences hereunder)


A composites market undergoing major expansion

Stimulated by the sharp economic growth and rapid urbanisation in the emerging markets of the Asia-Pacific region, the increase in demand for advanced composite materials has remained very steady. In 2010 world production of composites increased by almost 5% to reach 8 million tons. The Asia-Pacific region alone represents 38% of total volume, mainly due to the unprecedented growth in the Chinese and Indian markets.

According to the annual survey of the composites market carried out by JEC, which with 250,000 users worldwide is the largest organisation representing the composites sector, Asian production should reach 43% of global production of composites by 2015.

"The composites market is growing fast in most developed regions around the world, which in large part is based on industrial development in Asia", says Frédérique Mutel, JEC President and CEO. "The market is increasingly in demand of advanced composites for a wide range of applications. We believe composites will see sustained growth in the construction, aeronautics, automotive, wind-power and EEE (electrical and electronic equipment) sectors in Asia over the next five years. "


A promising anniversary

JEC Asia will be celebrating its fifth anniversary in Singapore June 26-28, 2012. Last year, the show attracted over 7,000 professional visitors from 51 countries, 76% of them from the Asia-Pacific region.
"The high attendance of professionals and decision-makers from Asia convincingly demonstrates that JEC Asia is the only professional event that can bring in everybody in the regional composites value chain", adds Ms Frédérique Mutel. "Following the previous four sessions, JEC Asia 2012 will highlight the latest technologies, the technical content and the innovative approaches that are making the news in composites, also offering a unique platform for exchanges of information and exploiting new commercial niches."

For the first time, JEC Asia will host a huge Singapore Pavilion. The other International Pavilions are Malaysia, Japan, the Republic of Korea, India, Germany and France.


What’s new at JEC Asia Composites Show & Conferences?

  • COMPOSITES TOURS: JEC Asia organizes a rich program for the Composites Tours, free of charge, to watch demonstration of composites applications or process.
  • JEC IPHONE APPLICATION: Especially launched for JEC Asia, the new JEC Iphone Application will contribute to optimize meetings, schedule conferences and the consultation of each exhibitor profile for the duration of JEC Asia and after.
  • MORE INNOVATION: The “Lab & Innovation Showcase” is a totally new area functioning as a Composites trends Observatory that showcases innovations and growth in the composites industry sector by sector.
    • A networking and business meetings area will be dedicated to meetings and exchanges to facilitate the flow of Business on the exhibit floor. This area will also include the Business Meetings program in private meeting rooms. This successful program of prearranged business meetings between exhibitors and top buyers has already proven itself.
    • A new service to put up posters for free to advertise on academics’ work or development.


Malaysia: country of honor 2012

Malaysia has been selected as country of honor for JEC Asia 2012 based on various criteria, in particular the rapid growth potential of the local composites market, and the solid network established between the worlds of science, technology, R&D, teaching and industry. Over the last 15 years JEC has developed lasting contacts with a large number of professionals and organisations in the Asian composites industry. With the selection of Malaysia as the country of honor in 2012, JEC Asia 2012 seeks to promote the products, technologies, research and professional skills on which current developments in composites are based in Malaysia.

"This year we will be emphasizing our partners from the world of education and research in order to encourage the dialogue between industry and the composites end-users, as well as to promote the extraordinary advantages of the new composite materials", explains Frédérique Mutel. "The Asian composites industry is increasingly concerned about the environmental impact of its production, and this year, JEC Asia has set itself the target of analyzing the market for biocomposites, which is an environmentally friendly solution. In this field Malaysia is making a large contribution."


Biocomposites, Automotive and Automation: three main themes at JEC Asia 2012

1. Biocomposites: improving the environmental impact of composites

With new environmental regulations requiring a reduction in CO2 emissions in all industrial sectors and with producers being encouraged to adopt sustainable concepts, biocomposites are enjoying strong demand.

JEC Asia 2012 will be presenting a range of innovations in biocomposites, emphasizing especially the rapid commercial expansion of natural fibers used to replace traditional glass and carbon fibres. Natural fibres can improve the environmental compatibility of composite materials, especially biocomposites, at a reasonable cost. All these developments are already emerging in Asia today. For instance, the Japanese car manufacturer Toyota is speeding up the incorporation of biocomposites in its production vehicles.


2. Automotive: reducing weight, reducing costs

JEC Asia 2012 will also be putting the spotlight on various important composite innovations for the automotive sector. The JEC annual survey shows that composite materials today represent almost 6% of the weight of vehicles. This penetration level is likely to rise since advanced composites can help car manufacturers to significantly reduce the weight of their vehicles, thereby reducing manufacturing costs.
"JEC Asia 2012 will showcase extremely varied innovations in materials, such as composite structures strengthened with long fibers that are currently revolutionizing car manufacturing", stresses Frédérique Mutel. "It will also be showing how these composite innovations can be adapted to the Asian market."


3. Spotlight on process automation: enhancing productivity and improving quality

The rapid industrial development of the Asia-Pacific region is also stimulating demand for process automation solutions that will help the improvement of manufacture, especially high added-value applications in the aerospace and wind-power sectors.

JEC Asia 2012 is fully focused on automated solutions, and will be presenting the very latest process automation solutions that can help the industry in Asia to optimize costs, enhance productivity and improve the quality of their products. In the wind-power sector, for example, manufacturers of wind-turbines worldwide are increasingly using robots to reduce the costs of blades by up to 40%, so that wind-powered energy can, in the end, become more competitive than hydroelectric energy.

"While only 30% of production processes in Asia were automated in 2001, regional market penetration of automated production solutions has reached 64% in recent years but is expected to increase approximately to the European or US automation levels, which are 85%" states Mrs. Mutel. "Automation is a powerful engine for technological progress in the composites industry, and JEC Asia 2012 will be offering Asian visitors a platform for finding out about the latest solutions for incorporating automation in composite production processes".

"Advanced automation technologies also allow companies in Asia differentiate themselves by adopting more complex production methods."

JEC Asia 2012 will highlight new automation possibilities for manufacturing processes that involve composite materials, and 35% of the exhibitors will be presenting equipment, machines and software solutions for process automation.


JEC Asia brings contents to composites professionals with the 5th I.C.S. (Innovative Composites Summit)

JEC Asia 2012 will be welcoming major specialists and global decision-makers from the composites sector, who will be sharing their expert knowledge at user forums and in the Innovation Awards program organized as part of JEC Asia.

The I.C.S. program is an educational program that offers forums and technical conferences about the latest innovations in the various application sectors of the composites industry and fosters dialogue between the academic, industrial and final-user sectors.

The forums and conferences are based on case studies and lectures by internationally-renowned specialists in research, design, development and production, specifically mass production.

The content is economic, technical and technological. This exchange of experience and strategic information serves to better prepare our industry for tomorrow’s challenges.

To celebrate its 5th Anniversary, JEC is granting everyone a free access to forums and conferences.



WIND ENERGY: The durability of structures

June 26 – 10:30 am / 1:30 pm

Key focus:

  • Faster production
  • Lighter & Longer blades
  • Stronger structures
  • How to build up a blade with a longer life of use

CONSTRUCTION & BUILDING: Emergency and composites

June 26 – 10:30 am / 12:30 pm

Key focus:

  • Studies and applications on concrete and cement
  • Structural strengthening of structure using carbon Fibre Polymer (TFC©)
  • Applications to prevent disaster and protect people

ECONOMY: Main trends – Composite market

June 27 – 10:30 am / 1:00 pm

Key focus:

  • Overview and dynamism
  • Markets, figures, key applications sectors
  • Analysis and forecast

CARBON: Carbon statement and new projects

June 27 – 2:30 pm / 5:00 pm

Key focus:

  • Global production overview
  • Growth Opportunities
  • Forecasts & Challenges supply chain the Automotive Industry

AUTOMOTIVE: E-car: what role for composites?

June 28 – 10:30 am / 1:00 pm

Key focus:

  • Conception and simulation of composites parts
  • Mass production of composites parts dedicated to e-cars
  • Bipolar plate made from carbon fibers

AERONAUTICS: What is the MRO impact of huge composite penetration?

June 28 – 10:30 am / 1:00 pm

Key focus:

  • Qualified repair method and material
  • New micromechanical modeling to improve prediction of the failure load and mode
  • Prevention and detection of defects


 English Press Release

 Korean Press Release