Original version of this article available @ http://www.jeccomposites.com

 
ADVERTISEMENT

Send this page / Print this page Home / Composites News / Business & Markets

More about this



25 Apr 2007  -  Europe

European market for wind turbines grows 23% in 2006


The market for European wind power capacity broke new records in 2006, according to the annual statistics issued by the European Wind Energy Association (EWEA). 7,588 MW of wind power capacity, worth some €9 billion, was installed last year in the EU, an increase of 23% compared to 2005.

The cumulative wind power capacity operating in the EU increased by 19% and now exceeds 48,000 MW. In an average wind year this will produce approximately 100 TWh of electricity, equal to 3.3% of total EU electricity consumption. For the seventh consecutive year, wind power is second only to gas-fired capacity (approximately 8,500 MW in 2006) in terms of new electricity generating installations.

Germany and Spain continue to attract the majority of investments. In 2006 these two countries represented 50% of the EU market. However, the figures confirm a healthy trend in the European market towards less reliance on Germany and Spain. In 2002, only 680 MW of European wind power capacity was installed outside the first-mover countries: Germany, Spain and Denmark. Last year, the figure was 3,755 MW.

‘Excluding the three pioneering countries – Germany, Spain and Denmark - we have experienced a six-fold increase in the annual market in four years. The figures clearly confirm that a second wave of European countries is investing in wind power. We are now witnessing the strong effect of the EU Renewable Electricity Directive passed in 2001 and, once again, urge the European Commission and the Council to introduce safeguard measures that ensure legal stability for renewable electricity in Europe. The figures released today confirm that sector-specific legislation is the most efficient way to boost renewable electricity production,’ says Christian Kjaer, Chief Executive, EWEA.

With 2,233 MW installed during 2006, a 23% increase compared to 2005, Germany passed the 20,000 MW mark.

Spain was the second largest market in 2006, with 1,587 MW. France moved up to third place in 2006 (from sixth place in 2005), with 810 MW installed during the year - more capacity than has previously been commissioned in the entire history of the French market. This reflects increasing success by developers in getting their projects off the ground.

Once again, Portugal performed well, with 694 MW of new capacity, more than in any previous year. With a further 1,063 MW already under construction, according to the research institute INEGI, the Portuguese market should be well on the way to meeting the government target of more than 3,750 MW by 2010.

With 634 MW installed in 2006, the UK also had another record year. Total installed capacity increased by 47%, taking one of Europe’s windiest countries close to 2,000 MW. The Italian market continued to perform well, with a further 417 MW installed, whilst Ireland set a new record with 250 MW, increasing its total capacity by 50%.

New wind power installations in the EU-10 tripled from 60 MW in 2005 to 183 MW in 2006, mainly driven by Poland, Lithuania and Hungary. Bulgaria installed 22 MW, while Romania connected 1.3 MW. Eight EU countries now have more than 1,000 MW of wind power capacity installed.

EWEA estimates that Europe accounted for approximately 50% of global wind power capacity installed during 2006. On Friday 2 February, the Global Wind Energy Council (GWEC) will release its 2006 global statistics.


Source : EWEA

JEC Marketplace

Tygavac Vacuum Bag and Tooling Materials for Composite Manufacture
Tygavac Advanced Materials Ltd, is a division of Airtech, the world’s leading vacuum bag and tooling manufacturer and supplier for autoclave and resin infusion applications. We provide the Aerospace, Wind Power, Automotive and Marine markets with a comprehensive product range, strong technical support and a worldwide distribution network.
Please visit www.tygavac.co.uk and www.resininfusion.com
 

Longpont Chengdu Longpont Composites Co., Ltd.
Longpont Co., Ltd. is the manufacturer of aramid paper from China. The aramid paper is used as honeycomb core material and insulation material by the customers from Europe and USA. Longpont solved the problem that aramid paper is in short supply in the world.
URL: www.longpont.en.alibaba.com, e-mail: davidlianjun@163.com

 

Reichhold Reichhold
World’s largest supplier of unsaturated polyester resins, also supplying gel coats & bonding pastes.
Visit our website: www.reichhold.com or contact us: composites@reichhold.com  

dark matter composites ltd dark matter composites ltd
Provision of expert consultancy, design and training services. An extensive range of composite training courses for beginners, technicians, engineers and designers. Remote consultancy services, bespoke courses and on-site training to suit your needs. For full details please call +44 (0)1582 469069 or visit our website www.darkmattercomposites.co.uk  

You Chang Carbon Fabric and Glass Fabric
You Chang Co., Ltd is specialized in manufacturing Fibreglass Fabric, Multiaxial , Uni-directional Carbon prepreg, Carbon Fabric, Basalt Fabric, Long Fiber Reinforced Thermalplastics.
We have woven all the glass fiber(carbon fiber)-related products from the ultra finest textures  to carbon fabrics, manufactured the variouse new compositional materials by coating, process it in resins for user with accumulated from years of experience. Please visit our web-site www.ycglassfiber.com.  

IIR Deutschland GmbH Structures for Aircraft - Design and Manufacturing
Aircraft materials and structures undergo a radical change. New composites solutions make possible to reduce dramatically the aircraft weight while improving its features. Benefit by new developments and visit www.aircraft-conferences.com
 

LAP Laser template projection and measurement of dimensions
LAP is manufacturer of laser template projectors for manual lay-up of carbon fiber parts, line lasers for alignment and laser measurement solutions. Besides standard products, LAP handles consultation, engineering, development, design and production of hardware and software for customized solutions. LAP and subsidiaries offer worldwide support for installation and commissioning.
Please visit www.LAP-LASER.com
 

Interested in having your company displayed here? Click here
 
 
Powered by Actinext, Groupe AFG - Terms of Use xhtml 1.0 css rss 2.0