Bertrand Piccard & André Borschberg unveil the Solar Airplane

Solar Impulse - © Solar Impulse

© Solar Impulse

Bertrand Piccard and André Borschberg unveiled, at Dübendorf airfield close to Zurich, the Solar Impulse HB-SIA, the first aircraft designed to fly both day and night without fossil fuel or pollution on June 26, 2009.

The presentation of the prototype took place in front of more than 800 persons, including 200 representatives of the international media, and many high-ranking guests among them H.S.H. Albert II of Monaco, the Swiss Minister of Energy and Environment, the CEOs of Solvay, Omega and Deutsche Bank and the CEO of the International Air Transport Association (IATA).

A revolutionary airplane
Bertrand Piccard and André Borschberg first retraced the history of the project since it was launched in 2003. 6 years of intense work, calculations, simulations and tests were needed by the 70-person team to complete this totally unprecedented aircraft: with the wingspan of a Boeing 747-400 and the weight of an average family car (1600 kg), never has such a large craft been built with such low weight; thanks to Composites. Over 12,000 solar cells mounted onto the wing will supply renewable energy to the four electric motors with a maximum power of 10 HP each. During the day they will also charge the lithium-polymer batteries (400 kg), which will permit the HB-SIA to fly through the night.

The HB-SIA is the first prototype of the Solar Impulse project. Its mission is to demonstrate the feasibility of a complete day-night-day cycle propelled solely by solar energy. After fine-tuning on the ground, the aircraft should make its first test flights between now and the end of 2009, first of all at Dübendorf airport (canton of Zurich) and then from Payerne air base (canton of Vaud). A first complete night flight is programmed for 2010 and will take place over Switzerland.

The results from the HB-SIA and their analysis will serve to develop and build a second aircraft, the HB-SIB for circumnavigating the word in five stages, each lasting several days, in 2012.

A supporters program
In response to demands from many enthusiasts, Solar Impulse announced a program specially reserved for people wanting to participate in the adventure and to express their support of the project’s philosophy. Supporters can enroll on www.solarimpulse.com to receive news in real time, to adopt a solar cell on the wing, reserve a VIP visit at the Solar Impulse base, or place their names on the aircraft's fuselage.

A symbol for promoting renewable energies
In a world dominated by fossil fuels, and given the urgent need to find sustainable solutions, the Solar Impulse project sets out to demonstrate the potential of renewable energies and to promote their use. It is also a symbol of the energy savings that can be accomplished using new technologies. The pioneering spirit which enabled man to conquer the planet and space in the 20th century should today allow us to find solutions to reduce our dependence on oil, not by reducing mobility and personal comfort, but by creating dreams, hope and enthusiasm.

Source : Solar Impulse

JEC Marketplace

SAHM - The Winding Specialist
Automatic and manual Take-up Winders for PAN Precursor Yarns and Carbon Fibers as well as High Performance Fibers. Automatic Package Handling and Transport Systems for Winders. For further details, please contact us. Georg Sahm GmbH & Co. KG · Sudetenlandstrasse 33 · 37269 Eschwege, Germany - Tel.: +49 5651/804-0 · E-mail: info@sahmwinder.de- www.sahmwinder.de

Oxford and Cherwell Valley College
The Bicester campus of the Oxford and Cherwell Valley College offers a wide range of composite training courses. We deliver training to all abilities and sectors and offer bespoke course tailored to specific needs. Facility and autoclave available for hire. For full details please call: +44 (0)1865 551155 Email: Phamlin@ocvc.ac.uk or visit our website www.ocvc-composites.co.uk

Recycle your dirty acetone
The Eco-dec solvent recycler is used for ACETONE, Methylene chloride and other solvents, as well as polyester resin. When paraffin is placed in the bottom of the machine, there is no residue build-up, because only the bottom of the machine heats up. This facilitates rapid cleaning. www.eco-dec.be - EMAIL: info@eco-dec.be

Vacmobiles.com Limited
Vacmobile vacuum systems and components are optimised for vacuum processes in composites, including resin infusion; RTM Light (ECO), pre-preg and vacuum bagging. Vacmobiles are exceptionally easy to use, but tough and capable of delivering excellent vacuum to the bag. We deliver worldwide. Please visit www.vacmobiles.com or email info@vacmobiles.com.

A plus Enterprises Ltd.
We are a leading frp tool (rollers,brushes etc),static mixer & protective coverall manufacturer in China. We are supplying our customers all over the world with super premium quality & unbeatable pricing. Please visit our web site: www.frprollers.com or www.alladhesivedispensers.com for detail. We are looking for distributors all over the world, please email jim65776577@hotmail.com to apply for it.

dark matter composites ltd
Provision of expert consultancy, design and training services. An extensive range of composite training courses for beginners, technicians, engineers and designers. Remote consultancy services, bespoke courses and on-site training to suit your needs. For full details please call +44 (0)1582 791001 or visit our website www.darkmattercomposites.co.uk

Thermwood - First in Cnc Routers
Thermwood Corporation manufactures both 3 and 5 axis CNC Routers used to cut, trim and shape a wide variety of materials including wood, plastics, composites and non-ferrous metals. These fast, accurate machines are used in a variety of industries including plastics, aerospace, defense, automotive, boating and medical. Please visit www.thermwood.com or Email sales@thermwood.com

CORECORK - is the brand of Amorim Cork Composites for core materials in sandwich construction.
The CORECORK presents solutions specially designed to exceed expectations of the most demanding composites applications, namely for Sports and Leisure, Buildings, Energy and Aeronautics, with the unique advantage of being a natural, sustainable and recyclable core material. CORECORK allows industry to build strong, stiff, light and highly durable structures with lightweight core materials. Contact us: Tel.: +351 227475300 · E-mail: acc@amorim.com - www.corecork.amorim.com

Z-LASER Optoelektronik GmbH
Z-LASER Optoelektronik GmbH projectors are used worldwide in many composite manufacturing processes e.g. for placing fiber mats inside a half-shell moulds. Whole contour of fiber mats, work pieces or positions of single elements can be displayed by the red or green laser light. The core competence of the German company is creating customized solutions for special demands of composite industry to increase quality and reduce manufacturing costs. Please visit http://www.z-laser.com or contact: Tel: +49 / 761 / 296 44-44 / E-Mail: info@z-laser.de

Interested in having your company displayed here? Click here

Composites Community

JEC Services

About JEC

Bertrand Piccard & André Borschberg unveil the Solar Airplane

JEC Marketplace