You are here

International Carbon Festival

Wednesday November 1 - 10:00am to 5:45pm
Grand Ballroom

International Carbon Festival

Organized by

KCTECH

 

11:00 AM to 11:20 AM
Matrix Composites & Engineering

Matrix Composites & Engineering

James Kingston

country:
Australia

Product Line Manager

Carbon Foams via Single Phase Syntactics (SPS)

  • Carbon composites have low/zero CLTE
  • SPS foams can be cast to net shape
  • Avoids complexity of pyrolysed billets
11:20 AM to 11:40 AM
SGL TECHNOLOGIES GMBH

SGL TECHNOLOGIES GMBH

Andreas Erber

country:
Germany

Director Lightweight and Application Center

Composite material technologies to cope with high volume production

  • Material toolboxes and related process chains
  • Design approaches to address mass production scenarios
  • Next generation automation technologies
11:40 AM to 12:00 PM
HENNECKE GMBH

HENNECKE GMBH

Donghoon Kang

country:
Germany

Sales Manager

Hollow HP-RTM carbon fiber parts

  • A fully automated process
  • The efficiency of the braiding process 
  • The recyclability of the binder system
12:00 PM to 12:20 PM
KUKDO CHEMICAL Co., Ltd.

KUKDO CHEMICAL Co., Ltd.

Chong-Soo Park

country:
South Korea

Vice Chairman

High performance epoxy resin systems for mass production of composites

  • Fast curing epoxy system
  • High Tg epoxy system
  • Mass Production (HP-RTM & Pultrusion)
12:20 PM to 1:20 PM - Lunch
1:20 PM to 1:35 PM
Jungwon University

Jungwon University

Seong Hee Kim

country:
South Korea

Professor

Carbon Art

  • Overview of Science Art
  • Carbon meets Art for creativity
  • Introduction of Carbon Artist Seong Hee Kim
1:35 PM to 1:55 PM
WEIHAI GUANGWEI COMPOSITES Co.,Ltd

WEIHAI GUANGWEI COMPOSITES Co.,Ltd

Haichao Huang

country:
China

General Manager Secretary

Technology development trends and applications of CFRP

  • Chinese carbon fiber
  • Production situation
  • Usage
1:55 PM to 2:15 PM
ANH Structure, Co., Ltd.

ANH Structure, Co., Ltd.

Philip Curzon

country:
South Korea

Deputy General Manager & Head of the Office of Airworthiness, ANH Structure

Development of composite structural analysis software, RACOMS

  • Plain strength (in-plain failure
  • Corner unfolding (delamination)
  • Sandwich panel (core crushing, skin wrinkling & dimpling, crimping and etc.)

  • Bolted joint strength (pure bearing, bearing/bypass, pull-through and etc.)

2:15 PM to 2:35 PM
Pinette GmbH

Pinette GmbH

Laurent Poisson

country:
Germany

Sales Area Manager

ECS Press for C-RTM and multi-application

  • Press ECS presentationShort stroke Press Advantage 
  • Press ECS in C RTM Parts production 
  • Press ECS in QSP line production 
  • Press ECS in Multi-process for Laboratory equipment
  • Press ECS for SMC
2:40 PM to 2:50 PM - Networking break
2:45 PM to 3:05 PM
SAERTEX GMBH & CO KG

SAERTEX GMBH & CO KG

Helge Haberkern

country:
Germany

Sales & Marketing Manager for Asia

Carbon Solutions for Composite Automotive Applications

  • Aspects that need to be considered to develop and optimize reinforcements for composite automotive parts
  • Recently provided reinforcement solutions
3:05 PM to 3:25 PM
HANKUK CARBON CO LTD

HANKUK CARBON CO LTD

Byungsun Hwang

country:
South Korea

Research Fellow

Development of a carbon roof panel using a prepreg compression molding (PCM) material

  • Characterization of carbon composites processing
  • Development of a rapid cure carbon prepreg
  • Prepreg compression molding of an automotive carbon roof panel
3:25 PM to 3:45 PM
ESI GROUP

ESI GROUP

David Prono

country:
France

Product manager for composites

On-line mixing high speed RTM process simulation for automotive mass production of carbon fiber reinforced structural components

  • Short cycle time Resin Transfer Molding for mass production
  • Lightweight structural parts for automotive and aeronautical
  • Micro and meso-scale mechanism influencing resin flow and polymerization
3:45 PM to 4:05 PM
L&L PRODUCTS

L&L PRODUCTS

Toru Inoue

country:
United States

Lightweight and Composite Expert

Carbon fiber and composite technologies contribution to the automotive

  • Lightweight by composite solution and dissimilar material bonding solution
4:05 PM to 4:25 PM
Axia materials Co., LTD

Axia materials Co., LTD

Yang Seog Jin

country:
South Korea

CEO

Thermoplastic composites for Building industries - The example of Pixel Haus®

  • An Organosheet by in-situ polymerization process based on self-developed matrix resin and process
  • Maximum width of 3.0m with continuous roll form
  • Composite Structural Insulated Panel (C-SIP) for building industry
4:30 PM to 4:40 PM - Networking break
4:35 PM to 4:55 PM
GEO Nation Co., Ltd

GEO Nation Co., Ltd

Se Ho Cho

country:
South Korea

Senior researcher

Binderless metal to resin joining technology

  • Joining Technology between metal and matrix
  • High Bonding strength and Sealing Performance
  • Adhesive-free construction
4:55 PM to 5:15 PM
2DM

2DM

Ricardo Oliveira

country:
Singapore

Professor

Innovative graphene composites for automotive industry

  • Biggest challenges of automotive industry
  • How graphene composites can be applied
5:15 PM to 5:35 PM
CHOMARAT

CHOMARAT

Francisco De Oliveira

country:
France

Automotive Market Manager

The Effects of Textile Structure on Class A Painted Body Panels

  • Improving surface appearance using RTM
  • Impact of C-PLY construction
  • Impact of layering NCFs
5:35 PM to 6:00 PM
Korea Institute of Carbon Convergence Technology (KCTECH)

Korea Institute of Carbon Convergence Technology (KCTECH)

Kyusoon Park

country:
South Korea

Director

Korean carbon valley and R&D activities

  • Infrastructure of Korean Carbon Valley
  • Overview of R&D including international collaboration
  • Introduction of KCTECH

Closing