You are here

Seatec 2012

08
Feb
2012
>
10
Feb
2012
PAST
Italy, Carrera

Seatec 2012 will be held form the 4th to th 8th of February in Carrera, Italy.

 

Program :


First session: Wednesday, February 8, 14.00 – 17.00

 


14.00 Registration

14.30 Wellcome and Introduction: Prof. Marino Quaresimin, Padua University / Giuseppe Coccia Chairman
14.40 Pre-pregs and composites production cycle. Under vacuum and autoclave to obtain better performing products and drastically cut the emissions.
Speaker: G. Bocchi, Marconi Industrial Services s.p.a.
15.05 Freedom of form and energy saving with sandwich composites.
Speaker: Marco Ferrero, Diab
15.30 A revolution in the transport industry: Foamtec, an eco-friendly technology for high performance composites.
Speaker: Alberto Cimadoro, Vaber/Foamtec
15.55 Consumable or reusable. A case for a more economic and ecological approach.
Speaker: Laura Fabi, Resintex
16.20 Epoxy resins applications: rate analysis of performance/costs and eco- compatibility.
Speakers: Giuseppe Coccia, Studio Coccia – Fabio Gaioni, Sika Italia
16.40 Conclusions, Q&A session.
17.00 End of first session.

 

II session: Thursday, February 9, 10.00-12.30



10.00 Registration
10.30 Introduction: Giuseppe Coccia, Chairman
10.45 Sika Biresin & Face Fibres: innovations to improve bio-composites.
Speakers: Giulia Gramellini, Sika Italia - Marco Achler , Face Fibres
11.05 XAM: a city vehicle made by vegetable fiber
Speaker: Massimiliana Carello, Politecnico di Torino.
The XAM (eXtreme Automotive Mobility) project was born in 2010. The project is focused on the development of a hybrid urban-vehicle that took part at the Shell Eco-marathon. The body, some interior parts, the seats and the instrument panels were made by vegetable fiber composites, recyclable. Linen fibers were chosen considering their mechanical characteristics and their compatibilities with resins, recyclable too, present on the market. Il May 2011, Xam won the Design Award.
11.30 Innovatives reinforcements for closed moulds.
Speaker: Manuela Astro: OCV
11.55 Cut down the environmental footprint of the shipbuilding industry. A challenge that must be won.
Speaker: Alessandro Cozzolino, Cantiere Nautico S. Lorenzo
12.20 Conclusions, Q&A
12.30 End of the session

 

 

III session: Thursday, February 9, 14.00-17.00


14.00 Registration
14.30 Welcome: Luca Olivari, Chairman
14.45 Introduction: Giuseppe Coccia
15.00 The LEAP project: a contruction in extreme environment.
Speaker: Luca Olivari
15.30 Active-e, an innovative public transport boat.
Speaker: Mario Bonelli, Studio H3O
15.55 The project management to run the projects.
Speaker: Marco Arcuri, ISIPM (Italian institute of project management)
16.20 Green Passport, a new way to design including the study of boats’ end of life
Speaker: Sergio Abrami
16.45 Conclusions, Q&A
17.00 End of the session
15.30 A revolution in the transport industry: Foamtec, an eco-friendly technology for high performance composites.
Speaker: Alberto Cimadoro, Vaber/Foamtec
15.55 Consumable or reusable. A case for a more economic and ecological approach.
Speaker: Laura Fabi, Resintex
16.20 Epoxy resins applications: rate analysis of performance/costs and eco- compatibility.
Speakers: Giuseppe Coccia, Studio Coccia – Fabio Gaioni, Sika Italia
16.40 Conclusions, Q&A session.
17.00 End of first session.