JEC Group have brought together the international community of composites leaders and executives in our Composites Circle as an unique networking opportunity to meet with both peers and future partners.
No. 1031 is a 650ºF (343ºC), electrically-heated walk-in oven from Grieve, currently used for curing composite components at the customer’s facility.
Workspace dimensions of this oven measure 96” W x 96” D x 84” H. 140 kW are installed in Incoloy-sheathed tubular elements to heat the oven chamber, while a 10,000 CFM, 7-1/2 HP recirculating blower provides a combination airflow to the workload. This Grieve walk-in oven features 7” insulated walls, top-mounted heating chamber, aluminized steel interior and exterior, plus 2” insulated floor with built-in oven truck wheel guide tracks.All safety equipment is onboard to handle flammable solvents, including explosion-venting door hardware and a 4400 CFM powered forced exhauster. Motorized dampers are provided on the intake and exhaust for accelerated cooling.No. 1031 controls include a digital programming temperature controller, manual reset excess temperature controller with separate contactors, 32-point digital recorder to track temperature, vacuum and pressure, recirculating blower airflow safety switch and SCR power controller. Also provided are a six-port vacuum manifold with pressure gauge, solenoid valve and vacuum transducer at each point, vacuum ballast tank with gauge and vacuum regulator and two-port compressed air manifold with gauge, solenoid valve and transducer. More information:www.grievecorp.com