You are here

Carbon fibre suspension links for high-end automotive manufacturers

News International-French

12 Sep 2019

Shape Machining has designed, manufactured and tested a carbon fibre suspension link for a high-end automotive manufacturer (OEM).

Carbon fibre suspension links for high-end automotive manufacturers

Carbon fibre suspension links for high-end automotive manufacturers

The design uses ShapeTex and epoxy thermoset resins technologies to make a part that can be pressed in very short cycle times.

The advantage of this technique over a formed aluminium part is a 45% weight saving.

Managing Director, Peter McCool

Managing Director, Peter McCool, said:

“This is a fantastic combination of technologies that we have developed, in-house, to exploit the growing market sector for advanced structural composite components in the automotive and aerospace sectors.”

 

Shape provided all the engineering, design, tooling and manufacturing services to complete this project. Shape offers these same services to all customers across a variety of industry sectors.

McCool added:

“By placing fibre only where it is needed, we create very efficient structures that can save a significant amount of weight for our customers. We successfully tested to destruction several of these links and I can confirm that they meet or exceed all the targets! Our customer was particularly happy with the safe mode of failure that we designed into the part.”

This technology is the intellectual property of Shape and is now being offered to the wider automotive industry. Shape is looking to adapt this technology for other automotive companies who have significant weight savings requirements and reduced un-sprung mass targets.