You are here

Dow Automotive Systems takes carbon-fiber bonding to the next level

News International-French

10 May 2016

Dow Automotive Systems adds an innovative injection bonding technique for Betaforce composite bonding adhesives.

Injection bonding is a further example of the customizing capabilities of Betaforce to address specific customer requirements for production, such as open times and cycle times, without affecting mechanical properties. By adjusting these parameters individually, Dow Automotive Systems helps customers improve their assembly process efficiencies. Further, this enables the wider application of carbon-fiber parts in mixed-material assembly and thus supports manufacturers’ lightweight strategies, such as those at BMW Group with its recent BMW 7er series.

Injection bonding can be used as a special process to bond carbon-fiber parts to metal in side-frame applications along the roof. Here, the carbon-fiber part is used as an inlay in a metal housing running along the A-pillar into the roof and down the D-pillar. This ensures stability of the passenger compartment in the case of a side-pole impact or rollover, as well as increasing vehicle torsional stiffness while improving subsequent ride-handling and NVH at the lowest mass. The challenge of integrating such long carbon-fiber composite parts is the management of the differential Coefficient of Linear Thermal Expansion (CLTE) along the assembly as well as during the operative life of the vehicle. Betaforce technology helps address that challenge.

About Betaforce composite bonding adhesives
Based on a two-component polyurethane structural adhesive technology, Betaforce is characterized by a high elongation factor and outstanding modulus. While the high modulus provides the needed stiffness, the elongation factor enables a high level of energy absorption and flexibility to manage differential CLTE. To achieve the joining of both materials, the adhesive is injected by a robot and surrounds the carbon fiber for a durable bond of different substrate components. Additionally, Betaforce provides superb adhesion to multi-material substrates, such as carbon fiber or coated metal, enabling advanced lightweight solutions for automotive manufacturers such as BMW Group.

Materials joined by Betaforce include carbon fiber with coated steel and with coated aluminum. Application areas include roofing, complete carbon-fiber compartments or hang-on parts, such as doors.

More information: