You are here

I.C.S.: Forums and Conferences for composite challenges

News International-French

30 Jan 2014

JEC Group has announced that the agenda is set for the 2014 I.C.S., which will take place next March 11 – 13 at Porte de Versailles, Paris.

JEC Europe I.C.S. program provides a comprehensive approach to technical information about new advances in composite markets. 

These conferences and forums will gather 42 speakers from 13 different countries, and from international companies such as: PSA Peugeot Citroën, Chomarat, Lamborghini, Dassault Systems, Stanford University, Ecole Polytechnique de Montréal, Johns Manville, etc…

 6 end-user industry forums


(Tuesday March 11, 10:30am / 1:00 pm)

The first step towards producing parts for any given industry is the designing of products and prototypes thanks to computers and advanced software. They enable users to create the part numerically and for example determine what impacts it can subsist, which defects are most likely to develop, etc. All this information is crucial to gaining time and saving costs for future development of the concerned part.


(Tuesday March 11, 2:30pm / 5:00pm)

From on-line quality control to post-machining, reworking and repair, automation is the key to mass production in the composite materials industry. The need to develop major craft parts as quickly as the industry demands has increased the need to use automated processes, such as fiber placement and tape laying.


(Wednesday March 12, 10:30am / 1:00 pm)

The materials and technology that an industry chooses are very much linked to the volume of its production. In the Automotive industry, mass production is the key. New materials, designing software, automation processes and End-Of-Life recycling solutions will enable the automotive industry to use composites to their full potential.

(Wednesday March 12, 2:30pm / 5:00pm)

Composite materials have now been used for about forty years in the aeronautics industry in increasingly numerous parts such as airframes, rotor blades or fuselage, depending on their mechanical properties. Weight reduction is a major factor in the Aerospace industry as concern for the environment grows and fuel costs become ever higher; as is cost reduction.


(Thursday March 13, 10:30am / 1:00 pm)

Over the last few decades, thermoplastic composites have gained market shares and importance. Their unique properties of thermoplastic composites such as toughness and impact resistance along with recyclability and therefore environmental benefits have created a lot of new opportunities in a broad range of applications.


(Thursday March 13, 2:30pm / 5:00pm)

Carbon fibers have long been specifically used in high-quality but restrained industries, due to the elevated manufacturing cost. However, their exceptional properties have made carbon fibers highly necessary in application sectors such as automotive and aeronautics. Lowering costs and enabling recycling are major challenges for this industry.

Click here to download the program

Click here to register to the conferences of your choice

More information: