You are here

L&L Products supplies structural adhesive for automotive applications

News International-French

3 Feb 2017

L&L Products joined a composite customer to work together on a solution to bond a rear spoiler made from carbon fiber reinforced polymer (CFRP) using a structural adhesive in an automotive application.

L&L Products supplies structural adhesive for automotive applications
The rear spoiler consists of a relatively complex design and multiple parts to be assembled into one high quality end product.

L&L bonding experts worked together with the customer to choose the right adhesive based on the technical requirements and the secondary aesthetic requirements, such as avoiding shrink marks. The final product needed to be a black adhesive to be used on the black CFRP to match the aesthetics.

The L&L team selected A-K083 BLACK, a product with high lap shear strength over 20MPa with sufficient modulus for this application, and develops 80% of its final strength within 10 minutes. The results proved to be an efficient method to produce these parts.

The technical service department at L&L Products in Altorf, France supported this project by providing a range of tests in order to prove that the selected A-K083 BLACK will perform as expected in the field. The technical service department had the capabilities to do lap shear, T-peel climate cycle, and fatigue tests.

L&L Products provides a range of structural adhesives based on multiple technologies and will exhibit at JEC World 2017 in Paris (Hall 6, Booth #R27).

Company: