JEC Group have brought together the international community of composites leaders and executives in our Composites Circle as an unique networking opportunity to meet with both peers and future partners.
Specially formulated to optimize bond strength, Master Bond UV15-42C is a UV curable system for bonding, sealing and coating applications.
This smooth paste can be applied vertically without sagging. As an optically clear compound, it is often used in the fiber-optic, optical, electronic, aerospace and specialty OEM industries.This one part system bonds well to a wide variety of substrates including glass, metals, composites, rubbers and most plastics. Adhesion to acrylic and polycarbonates is exceptional. UV15-42C also features a tensile strength of 5,000-6,000 psi and a tensile modulus of 250,000-300,000 psi at room temperature. Its toughness enables it to withstand thermal cycling as well as mechanical shock. UV15-42C is also resistant to chemicals such as water, oils, cleaning agents, acids and bases.It cures readily in 10-30 seconds upon exposure to a UV light source emitting a 320-365 nm wavelength with an energy output of 20-40 milliwatts/cm2. UV15-42C is not oxygen inhibited and will cure in thicknesses up to ¼ inch. This electrically insulative, dimensionally stable system has low shrinkage upon curing.UV15-42C is serviceable from -65°F to +300°F and is available for use in syringes and cartridges. It can also be3 purchased in ½ pint, pint and quart containers. Master Bond non-drip adhesivesMaster Bond UV15-42C is an optically clear, toughened, UV curing system that bonds well to many substrates. This one part formulation is easy to handle with a non-sagging paste viscosity and rapid cures. More information: www.masterbond.com