You are here

Park Electrochemical Corp. introduces Electroglide lightning strike protection prepreg

News International-French

13 Mar 2018

Park Electrochemical Corp. announced the introduction of Electroglide Lightning Strike Protection Prepreg for aerospace applications.

The Federal Aviation Administration estimates that, on average, lightning hits each airliner in U.S. service once a year. When lightning strikes an aircraft structure built from aluminum, this highly conductive metal is able to dissipate the extreme energy from the lightning strike and prevent any serious damage to that structure and the aircraft. Many new aircraft produced today contain structures built with composite materials which are not as conductive as aluminum structures. For this reason, composite materials used to construct aircraft structures, such as wings, fuselages, tail sections and engine nacelles, are embedded with a metal mesh which acts to dissipate the energy from a lightning strike, thereby avoiding damage to the structure and the aircraft. Electroglide lightning strike protection prepreg has undergone stringent testing by an independent certified laboratory, where the material is exposed to electrical charges that mimic a lightning strike. In such testing, Parks’ Electroglide lightning strike protection prepreg was exposed to 200,000 amperes of current with no failures.

Electroglide is an epoxy based lightning strike protection system compatible with most epoxy prepregs, primers and paints and offers protection for aircraft from lightning strikes. It can be processed both in-autoclave and out-of-autoclave with a dual cure capability (250°F and 350°F). Electroglide produces a smooth, aesthetic finish, reducing both paint surface preparation time and weight from post sweep and sand-filling of pits and voids. Electroglide has superior handling during the layup processes, compared to other lightning strike protection solutions, because of its flow characteristics, high tack and drapability. Conductive substrates are offered in a variety of weights and substrate types (copper and aluminum) to meet Zone 1A, Zone 1C and Zone 2A requirements. Electroglide is available in natural or black (Additional colors may be available upon request).