Aim3D introduces Voxelfill

Aim3D has announced details of its Voxelfill process for sustainably improving the strength properties of a layer-based 3D component, alongside the launch of a new 3D printer, the ExAM 510.

Aim3D introduces Voxelfill

2 minutes, 0 secondes

Aim3D’s ExAm510 can work with high-temperature plastics such as PEEK, PEI, PSU, PPS, with or without fibre filling.

Aim3D was set up in 2017 as a spin-off company of the German University of Rostock. The company has set out to develop 3D printers that could replace injection moulding whilst using the same pellets that are commonly used for injection moulding so that users would have a range of existing materials with known properties to choose from. Aim3D makes use of two processes: Fused Granulate Moulding or FGM for plastics, which is similar to the widely used Fused Filament Fabrication approach but with pellets rather than filaments; and Composite Extrusion Moulding or CEM for metallic and ceramic injection moulding pellets, which uses a process similar to Fused Deposition Modelling but follows this with a sintering stage to dissolve the binder and bond the particles together.

However, Aim3D suggests that the nature of 3D printing – building parts up one layer at a time – inherently leads to components with inhomogeneous strength properties, meaning that they are more brittle along the Z axis than the X and Y axes, at least when using polymer materials.

So the new Voxelfill process is designed to overcome this for printing plastics, metals and ceramics. The idea is to use cross-layer filling, essentially injecting thermoplastic material with the extruder into cavities in the lattice structure used to build the part being manufactured. However, this is not simply filling all the cavities, or voxels, in one plane but instead uses a more distributed pattern that’s said to result in a ‘brick-like bond’ in the part. This should lead to both greater strength and improved elasticity in the Z-direction of the parts being printed. Moreover, this additional material reduces the overall printing time required.

It can be used with different materials, and by varying the materials used for the Voxelfill, it’s possible to create multi-material parts for the inner walls to tweak the material properties. That could mean tailoring the weight, damping properties, elasticity or changes to the centre of gravity for each individual part being printed. Also, it’s possible to use the Voxelfill more in some areas than others to vary the properties in different parts of an object. 

Voxelfill can also be used with fibre-reinforced materials, with the option to align the fibres to enhance mechanical properties of the part.This can already be done on the flat areas but with Voxelfill it can be extended to the contour and the inner walls of the component and should also improve the object’s mechanical properties.

Clemens Lieberwirth, CTO at AIM3D, commented: “Of course, the Voxelfill process is particularly suitable for 3D printing of plastics and fibre-filled plastics, but it is also suitable for 3D printing of metal and ceramic components using the CEM process. In general, there are advantages due to the higher build speed and cross-layer filling.” 

Source: nessancleary.co.uk

More information www.aim3d.de